A software bug, poor installation, or a power outage might be the cause of your Laview Light Bulb Camera's inability to switch on or off. To get it to function again, use these troubleshooting steps:

1. Examine the source of power

Make sure the lightbulb is firmly put into place and plugged into a working socket. To make sure electricity is getting to another device, try connecting it into the same socket.

2. Clear the Camera's Light Bulb

Unresponsive behavior can occasionally be fixed with a reset. The bulb will blink to show that it is in pairing mode if you turn it off and on three or five times.

3. Problems with Wi-Fi Connections

Verify that the camera is linked to Wi-Fi if it isn't turning on or off remotely. Issues with response may arise from a weak connection. 

Reconnect the camera and restart your router.

4. Firmware Update

Operational problems may arise from using an out-of-date firmware version. Look for and install any outstanding updates in the Laview app.

5. Reset Your Laview NVR to Factory Settings

Resetting the factory-reset-laview-nvr settings may be helpful if you're using the camera with an NVR system. To resolve connection and control issues, follow the reset instructions in your NVR handbook.

6. Speak with our expert

For more help, contact our experts if none of these solutions resolve the issue.

You should be able to resolve the Laview light bulb camera not turning on or off problem and restore functionality by following these instructions.

Visit our website to know more.